Acid Digestion Fume Hood

Acid Digestion Fume Hood

 Acid Digestion fume hood

Introduction:

Apzem Acid Digestion Fume Hood is manufactured for performing acid digestion applications. And this fume hood is not meant for perchloric acid fume hood applications. Acid digestion fume hood applications use very concentrated acids. Our product is designed with unplasticised polyvinylchloride (u-PVC) internal surfaces (including the work surface) and a polycarbonate sash window and it gives efficient chemical resistance. By using polycarbonates sash as glass which is easily etched by the chemical acids such as hydrofluoric acid.


Key Benefits:

  1. High containment
  2. Front is sloped
  3. Energy saving is high
  4. Full u-PVC interior
  5. Very good protection against acids

Safety Features:

  1. The beauty of our product is that without sacrificing visibility the sash handle gently direct air into the hood.
  2. Elimination in backflow and reducing turbulence near the work surface level is done by the maximum airflow from the foil.
  3. Thermal Heat Relief is quickly achieved.
  4. Shaping vanes increase airflow "sweep" at the critical area at the sidewall to improve containment, especially when laboratory personnel walk fast in front of the hood.
  5. Sash is designed from polycarbonate in order to prevent from hydrochloric acid fume etching.
  6. When the fume hood is fault, restrict access to equipment set up in the hood or facility shutdown then the sash can also be locked down in the fully closed position with the key
  7. Sash key lock allows laboratory manager to restrict access to the fume hood.
  8. The laboratory manager or safety officer to restrict operations at sash openings is made when the sash creep-down mechanism can only be disabled with a key, this is the main beauty of the sash of our product.
  9. Sash stop limits sash movement beyond its normal height which 'encouraging' user to work at safe positions.

Superstructure:

  1. Superior chemical resistance which is ensured by U-PVC
  2. Light intensity is ambient conditions. Hood lighting is pre-wired and it is energy efficient, instant start.
  3. By using poly vinyl chloride the U-PVC internal chamber is constructed.
  4. Our product gives maximum robustness.
  5. Sash and chain support.

Fume Hood Accessories

Apzem manufacturers and supplies large number of Walkin fume hood accessories like exhaust blower,fume hood scrubber,fume hood monitor for different applications.


Serviceability:

  1. Removable front panel facilitates easy access to lighting and other electrical components mounted above the hood chamber.
  2. When hoods are installed next to each other the internal access panel on side wall which access to plumbing connections for service.
  3. U-PVC internal work zone allows for easy cleaning of all surfaces.
  4. Chain and sash system requires minimal service.
  5. We can clean inside the hood by allowing the removable baffle system.

Safety Certified and Tested:

All Apzem fume hood are manufactured for the most demanding different laboratory applicaton.

  1. Each Acid Digestion Fume Hood is tested and certified with ISO 9001-2008 standards.
  2. Sash is clearly labeled with all operating instructions and illustrations.

Warranty:

The Apzem Acid Digestion Fume Hood is warranted for 1year with the consumable part and accessories.

Downloads:

Product Manual

product manual

Service Manual

service manaul

User Manual

user manual

FAQ's:

  1. what is Acid Digestion fume hood?
  2. When should I choose self-cleaning filter versus disposable filter models?
  3. What is the difference between a high volume extractor versus a high vacuum extractor?
  4. Are all filters made the same?

Related Products:

Professional Fume Hood

professional-fume-hood

Perchloric fume Hood

  Perchloric fume Hood

Ductless Fume Hood

 Ductless Fume Hood

Walkin Fume Hood

 Walkin Fume Hood

Radio Isotope Fume Extractor

  Radio Isotope Fume Extractor

Basic Fume Hood

  Basic Fume Hood